Search results for: Dlp Television.html

Total: 10 items

Samsung HL-R5678W DLP TV

Hello. I own a HL-R5678W DLP television and after being on for about twenty minutes an annoying sound will come out from the back of it. There is no color change or any visual problems with the picture. Is this the color wheel? The sound began when I installed a surround sound system in that shakes the walls. Could a fan or even the...
rszkotak

SAMSUNG DLP TV WON'T STAY ON

I have a Samsung HL-T5075S television (DLP) It first started shutting the lamp off after 10-20 minutes of use. I replaced the bulb. If I leave it off for a while, it will power on and show a beautiful picture. But then after 4-5 minutes the lamp goes off. All the fans continue and apparently the TV attemps to restart only to have all three...
secondliners

Samsung DLP HLN5065W - Black and White negative

I have had problems with my Samsung for a couple of months now. While watching the television whatever is on the screen will turn to black and white (no gray scale) negative image. The power button does not work at that point and the television must be unplugged. I read that the DMD board needs cleaning or replacing. I have tried...
SaschaRory

Samsung DLP HLN5065W - Black and White negative

I have had problems with my Samsung for a couple of months now. While watching the television whatever is on the screen will turn to black and white (no gray scale) negative image. The power button does not work at that point and the television must be unplugged. I read that the DMD board needs cleaning or replacing. I have tried...
SaschaRory

Get a Replacement DLP Lamp for your Toshiba TV

Don't get caught without a spare DLP lamp. If you have more than a few thousand hours on it, it could go at any time. How do you know if you need a new lamp? The display becomes dim, or The lamp indicator light blinks, or You hear a loud pop when turning on or viewing the television indicating that the lamp has burst. How to...
scott

Replace the Ballast on your Samsung DLP

WARNING: Before doing any work on your television, make sure that it is unplugged and has not been in operation for more than 1 hour to allow the lamp to cool down. Use extra caution when working on a power supply, like the ballast in this topic. Even when the television is unplugged, do not touch the electronics within the device. ...
scott

How to Access the Samsung DLP Service Menu

The service menu allows you to change many settings on your Samsung DLP television. I would recommend against any changes if you don't know exactly what you're doing. But if you do change your lamp, you can reset the lamp hours counter. Turn your system off Use the remote and press the following buttons with about a half-second...
scott

DLP Display Going Dark?

I get a lot of questions from people who are experiencing their DLP television display going dark. I can only imagine that it's the lamp that's causing this. Is it possible for a DLP lamp to darken as it gets "tired"? Have you had this problem? Did you fix it? How?
scott

Do you have a noisy DLP Television?

Most people who own a DLP Television that has become noisy think that it is a noisy fan. It makes perfect sense. Clearly the noise is being made by something spinning. More often than not, however, the noise is caused by the television's color wheel -- the OTHER thing in a DLP TV that spins. The color wheel, pictured above, is a small...
scott

How to replace the lamp in your Toshiba HM and HMX Television

It seems that many owners of the Toshiba HMX Television have experienced short lamp life, less than 2000 hours. The manufacturer indicates that you can expect 6000-8000 hours of usage depending on whether you use the TV in low power mode or not. When the lamp needs to be replaced, the television will blink it's red and green LED lights at...
scott