Search results for: Ballast.xml

Total: 20 items
RSS

Color Wheel or Ballast?

Question Hello, I too have an issue with my Samsung, I been told by a cutomer rep. for Samsung that he would replace the color wheel first. But, my concern is what if its the ballast. When it first happened I heard a pop, then color started to fade. I turned it off and turned it back on the next morning. All three lights where...
scott

maranta vp-12s1 dlp projector

where can I get a replacement ballast for my Marantz VP-12S1 dlp projector? or could the ballast be repaired?
luishernandezcott

Samsung DLP Ballast For Model SP-50L7HX

I need to replace the ballast. Can anybody help me with the part Number
phdurrani

DLP Samsung HL-R4667W TV lamp wont come on

Scot, Before my TV (DLP Samsung HL-R4667W, about 3yrs old) went blank, it shut itself off every other day or so, but would come back on when I re-powered it. A few days ago I heard a popping sound and the TV just turned itself off and couldn't be started again. I replaced the lamp, although it looked good to me, but to no avail. I had...
phillipsnelson11

samsung dlp lamp problem solved

My Samsung (labelled AKAI) indicated a bad lamp, so I replaced it. Still bad, so I took it to a TV repair place. They told me they reseated the lamp, and it worked. When I got it home, it worked for 10 minutes. I reseated the lamp, and it worked for another ten minutes or so. Being a retired electronics tech, I suspected cooroded...
cleanturn

samsung dlp lamp problem solved

My Samsung (labelled AKAI) indicated a bad lamp, so I replaced it. Still bad, so I took it to a TV repair place. They told me they reseated the lamp, and it worked. When I got it home, it worked for 10 minutes. I reseated the lamp, and it worked for another ten minutes or so. Being a retired electronics tech, I suspected cooroded...
cleanturn

Samsung hl72a650

My tv is 8 months old and recently started turning off and then on over and over until I unplug it. I have been told that it might be the bulb, ballast, or main/power boards. Any idea where I go from here to fix this?
kevinbore

Samsung hl72a650

My tv is 8 months old and recently started turning off and then on over and over until I unplug it. I have been told that it might be the bulb, ballast, or main/power boards. Any idea where I go from here to fix this?
kevinbore

humming noise and no screen

my dlp is not turning on after replacing it with a new bulb and after a few seconds it started to make this humming sound. what could be the problem? could it be the ballast or the blower? how can i distinguish which is the problem. thanks.
dlpdilemma

humming noise and no screen

my dlp is not turning on after replacing it with a new bulb and after a few seconds it started to make this humming sound. what could be the problem? could it be the ballast or the blower? how can i distinguish which is the problem. thanks.
dlpdilemma

Samsung HLN617W Ballast or Lamp

Hi, I have Samsung HLN617W DLP TV. It is about 5 years old. Bulb on this TV broke (when I took it out, I can see that filament was broken). I bought new bulb and put back in.(New bulb is exacly same has old one). Now issue is that when I turn on TV, I see screen comes on for about 3 sec and then it shuts off TV. After that all three lights...
niteshjhaveri

problem w/ samsung dlp tv

I recently had my lamp go out on my 15 month old 46" samsung dlp tv so i replaced it...still it didnt turn on...after some troubleshooting i found out it could be a faulty ballast, so i replaced that as well...still, it does not turn on...i guess, the only thing left COULD be a bad color wheel, but my tv is not making any kind of humming...
burdenboy9

problem w/ samsung dlp tv

I recently had my lamp go out on my 15 month old 46" samsung dlp tv so i replaced it...still it didnt turn on...after some troubleshooting i found out it could be a faulty ballast, so i replaced that as well...still, it does not turn on...i guess, the only thing left COULD be a bad color wheel, but my tv is not making any kind of humming...
burdenboy9

Another Samsung Lamp Question

I replaced the lamp in my HL-R4667W. It turned on no problem, watched it for 2 hours last night. Today after about 1 hour it turned off and the lights are blinking on front again. Can a bad ballast cause the lamp to go out? What about the cooling fan how can I check that? Thanks for any help.
Byron

Samsung Hls5666wx/xac Ballast Filter Capacitor Broke Again And Again

from beginning,this set can satrt with picture and sound, after 20 seconds, it shut down .i can see TIMER/LAMP/STANDBY LED flash at same time. I thought it is Lamp problem, after replaced a new Lamp,same problem. So I changed with a new ballast , it work as long as 2 hours., then shut down like before. I checked the new ballast board,foud a...
sunny

SAMSUNG DLP TV 43

MY DLP TV PICTURE WAS GETTING DIM SO I REPLACED THE LAMP. WHEN I TURNED IT BACK ON IT MADE A HIGH PITCHED WHINE AND A SCRAPING NOISE.I THEN REPLACED THE COLOR WHEEL. AFTER I PUT EVERYTHING BACK TOGETHER AND TRIED TO TURN ON THE TV IT STARTS UP LIKE IT SHOULD BUT THE LAMP NEVER TURNS ON. IT MAKES 3 ATTEMPTS AT THIS THEN I GET 3 BLINKING...
ONELAP

Samsung DLP won't turn on

Timh asks: "my samsung 43 inch wont turn on. it tries to, it makes the startup sound when i first turn it on then it makes a high pitch sound. it keeps trying to turn on for a while then all three led lights blink. samsungs website said it was the lamp, so i got a new one and put it in but the same thing happens. any ideas? how do i tell...
scott

Problem with my panasonic dlp model number PT52LCX15

the ballast doesnt work on my baby anymore and I also went to partstore.com and I couldnt find my part any ideas where can I find it. One more thing is it easy to replace it?????
serge123

What's Wrong with my DLP?

I have a 46" Samsung DLP, 2 yrs. old. I am trying to diagnose exactly what needs to be replaced. There is absolutely no picture, audio though, and when I plug it in it flashes LAMP. It then will turn on and off a couple times by itself until it finally shuts off for good and all 3 lights begin blinking. Now, I have replaced the lamp and this...
clemens8081

Replace the Ballast on your Samsung DLP

WARNING: Before doing any work on your television, make sure that it is unplugged and has not been in operation for more than 1 hour to allow the lamp to cool down. Use extra caution when working on a power supply, like the ballast in this topic. Even when the television is unplugged, do not touch the electronics within the device. ...
scott